8
NEURAL DSP // ARCHETYPE PLINI
NEURALDSP.COM
SARCHETYPE PLINI AMPLIFIER SECTION
CLEAN AMPLIFIER
CRUNCH AMPLIFIER
GETTING STARTED
GAIN KNOB : You can adjust the output signal and
compensates for an eventual volume-loss caused by the
compression.
STOMP BYPASS SWITCH: Press to activate. This will turn on
the compressor.
OVERDRIVE PEDAL
DRIVE KNOB: Adjust the amount of Gain the pedal will
boost out to the head.
TONE KNOB: The tone knob controls the treble frequencies.
Increase it and you let all the treble frequencies through,
set it to 0 and it cuts a decent amount of treble and even
some high mids.
LEVEL KNOB: Controls the overall volume of the pedal.
STOMP BYPASS SWITCH: Press to activate. This will turn on
the overdrive and let it process your signal.
To Next Page
Loading...