9
NEURAL DSP // ARCHETYPE PLINI
NEURALDSP.COM
LEAD AMPLIFIER
The controls are the same for all the amplifiers. You can
switch them by clicking the following icons at the bottom
of the plugin:
GAIN KNOB: Controls the amount of Gain in the preamp
section.
BRIGHT SWITCH: The signal is very warm, bouncy, and
possess tremendous sparkle, which is further enhanced
with the Bright Switch.
BASSMIDTREBLE KNOBS: Tone stack of the amp. 3 band
EQ.
GETTING STARTED
MASTER KNOB: Controls the overall volume of the amp.
PRESENCE KNOB: Adjusts the amount of high frequencies.
ONOFF AND STANDBY SWITCH LINKED: This switches
will move together to bypass your signal, as the amp would
be off.
EQ SECTION
High-fidelity Graphic EQ that allows you to see graphically
and control individually a number of different frequency
bands.
To Next Page
Loading...