Neurona OpticHD - Question & Answer; Application Wi-Fi Connection Issues; Resetting Wi-Fi Name and Password; Troubleshooting Power;Recording Issues

1) Using
the provided USB cable, connect the OpticHD Glasses to the computer.
2)
Using the file browser of the computer (i.e. Windows Explorer), navigate to the microSD card
drive that was mounted in step 1 above.
3) Open the drive
and create
4) Open the setdate.txt
file and type the
digits) leaving a space
between each value. E
Notice:
default time is 24 hours
5) Disconnect
the OpticHD Glasses
6)
Power on the OpticHD Glasses and
15.
Question & Answer
15.1. The
OpticHD Application cannot connect over Wi
1) Check the Wi-Fi
switch to
2)
Verify that your mobile device is not connected to another Wi
Note: It is very important to ensure that your mobile device will not automatically switch to
another known Wi-
Fi network when trying to use it with the Opt
recommended to remove all known Wi
they are in range when using the mobile device with your OpticHD Glasses.
15.2. Forgot the Wi-
Fi name and/or password
1)
Using the provided USB cable, con
2)
Using the file browser of the computer (i.e. Windows Explorer), navigate to the microSD card
drive that was mounted in step 1 above.
3) Create a text
file named ‘SSDIREST.TXT’
4)
Turn off the OpticHD Glasses
Note: The text fil
e will be de
15.3.
The OpticHD Glasses will not turn on
1) If the glasses
turn off automatically
of the battery capacity indicator
remaining is less than 10% and requires immediate recharging.
2) Verify that the micro
SD card is fully plugged
3)
Verify using the OpticHD Application that the microSD card has storage capacity available
4) Verify if the
blue light flash
a) If it does, please
initiate
Note: Before executing this step, use a computer to back up any important data that
may be on the microSD card, as it will be lost once the formatting step is completed.
b) The
glasses will turn off automatically
c)
Power on the glasses
5) Verify if
the blue light stays
a) If glasses are in a
pause
start recording.
OpticHD™
the provided USB cable, connect the OpticHD Glasses to the computer.
Using the file browser of the computer (i.e. Windows Explorer), navigate to the microSD card
drive that was mounted in step 1 above.
and create
a text file named ‘setdate.txt’ under root directory.
file and type the
Year, Month, Date, Hour, Minute, Second
between each value. E
xample: 2015 11 16 11 30 59
, then save the file.
default time is 24 hours
the OpticHD Glasses
from the computer.
Power on the OpticHD Glasses and
start recording to update the time setting.
Question & Answer
OpticHD Application cannot connect over Wi
-
Fi to the OpticHD Glasses
switch to
verify that it is in the ON position
Verify that your mobile device is not connected to another Wi
-Fi network.
Note: It is very important to ensure that your mobile device will not automatically switch to
Fi network when trying to use it with the Opt
icHD Glasses. It is
recommended to remove all known Wi
-
Fi networks that are stored on your mobile device IF
they are in range when using the mobile device with your OpticHD Glasses.
Fi name and/or password
Using the provided USB cable, con
nect the OpticHD Glasses to the computer.
Using the file browser of the computer (i.e. Windows Explorer), navigate to the microSD card
drive that was mounted in step 1 above.
file named ‘SSDIREST.TXT’
in the root directory of the microSD card
Turn off the OpticHD Glasses
to reset Wi-Fi
name and password back to the factory default,
e will be de
leted automatically upon reboot
The OpticHD Glasses will not turn on
or start recording
turn off automatically
when
attempting to turn them on, then monitor the state
of the battery capacity indicator
. If battery capacity indicator is red, then
the battery power
remaining is less than 10% and requires immediate recharging.
SD card is fully plugged
into the microSD slot in the OpticHD Glasses
Verify using the OpticHD Application that the microSD card has storage capacity available
blue light flash
es quickly when the OpticHD Glasses are turned on.
initiate
a short press of the ON/OFF Button to
format microSD card
Note: Before executing this step, use a computer to back up any important data that
may be on the microSD card, as it will be lost once the formatting step is completed.
glasses will turn off automatically
once the formatting is complete
Power on the glasses
to record video normally.
the blue light stays
on when turning on OpticHD Glasses.
pause
d state, please initiate a short press on the ON/OFF
OpticHD™
Using the file browser of the computer (i.e. Windows Explorer), navigate to the microSD card
Year, Month, Date, Hour, Minute, Second
(total of 14
, then save the file.
Fi to the OpticHD Glasses
Note: It is very important to ensure that your mobile device will not automatically switch to
icHD Glasses. It is
Fi networks that are stored on your mobile device IF
Using the file browser of the computer (i.e. Windows Explorer), navigate to the microSD card
name and password back to the factory default,
attempting to turn them on, then monitor the state
the battery power
into the microSD slot in the OpticHD Glasses
Verify using the OpticHD Application that the microSD card has storage capacity available
.
format microSD card
Note: Before executing this step, use a computer to back up any important data that
may be on the microSD card, as it will be lost once the formatting step is completed.
d state, please initiate a short press on the ON/OFF
button to