34 www.neutonpower.com
Blade Sharpener
The NEUTON Blade Sharpener (Figure 27) is a very useful hand-held sharpener.
1. Remove the Blade and secure it in a vise.
2. Position the carbide insert of the Sharpener, which has a “-“ sign, against the edge to be
sharpened.
3. Press down firmly and pull the Sharpener from the inside edge toward you. Usually three (3) or
four (4) strokes are sufficient. Repeat for the opposite end of the Blade. It’s as simple as that!
You can also use the Blade Sharpener to easily sharpen Pruners, Loppers, Axes, or any other cutting or
chopping tool.
Figure 2
Blade secured in vise.
Carbide Inser
Edge to be sharpened
TIP
To Next Page
Loading...
