Neuton Power Equipment
75 MEIGS ROAD, VERGENNES, VERMONT 05491
www.neutonpower.com ©2010 Neuton Power Equipment 240481B
Daily Checklist for your NEUTON Mower
To help maintain your NEUTON Mower for optimum performance, we recommend you follow this
checklist each time you use your machine.
[ ] BATTERY: Make sure the Battery has a full charge.
[ ] CLEAN: Before inserting the Safety Key, inspect the Mower Blade and clean it to remove any
debris (such as grass or twigs) that might be clinging to the Blade from its last use.
For the best performance and longest life of the Blade, it is best to clean the Blade of
any clinging debris after each use. Always follow the safety precautions when
cleaning the Blade.
Make sure the Control Bar is clean and operating smoothly. See page 36.
[ ] NOISES: If you notice anything unusual, such as a vibration or odd sound, shut the Mower
down immediately. Remove the Safety Key and, following all safety procedures,
inspect the Mower Blade and underside of the Mower for any obstructions.
If you cannot find the cause of the problem or are uncertain what to do, then have the
Mower inspected by a qualified repair shop before using it, visit our website at
www.neutonpower.com, or call Neuton Power Equipment Technical Support
Department, Toll Free, at 1-866-NEUTON1 (638-8661).
[ ] MOWING: If you are uncertain whether the grass you want to cut is too long or thick for optimal
cutting, raise the Blade Height and mow the yard in multiple passes, cutting it slightly
shorter each time. It is best to mow more frequently, rather than let the grass become
excessively long. For the best results, see “Mowing and Lawn Care Tips” in Chapter 4.
We hope you will enjoy many years of satisfied use with your NEUTON Mower.
Director, Customer Relations
This manual made from recycled paper and is recyclable.
To Previous Page
Loading...
Need help?
General
