Nevadent SMD 24 A1 User Manual

■ 16
│
GB
│
IE
│
NI SMD 24 A1
Fault Cause Remedy
The nozzle attach-
ment
2 has a leak.
The nozzle attachment
2 is not properly
attached to the hand
unit
4.
Attach the nozzle attachment
2
properly to the hand unit 4 (see section
Attaching/removing nozzle attachments).
The nozzle attachment
2 is defective.
Replace the nozzle attachment
2
(see section Attaching/removing
nozzle attachments).
Disposal
Disposal of the appliance
The adjacent symbol of a crossed-out wheelie bin means that this appliance is
subject to Directive 2012/19/EU. This directive states that the product may not
be disposed of in normal household waste at the end of its useful life, but must be
taken to a specially set-up collection point, recycling depot or disposal company.
This disposal is free of charge for the user. Protect the environment
and dispose of this appliance properly.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
Disposal of the packaging
The packaging materials have been selected for their environmental compatibility
and ease of disposal and are therefore recyclable.
Dispose of packaging materials that are no longer needed in accordance with
applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal, if necessary
.
The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites.

Nevadent SMD 24 A1 Specifications

General

Brand	Nevadent
Model	SMD 24 A1
Category	Dental equipment
Language	English