Need help?Do you have a question about the New Holland 8770 and is the answer not in the manual?
General| Engine Type | Ford 7.5L 6-cyl diesel |
|---|---|
| Horsepower | 170 hp |
| Transmission | 16-speed full power shift |
| Fuel Capacity | 341 L |
| Weight | 7, 484 kg |
| Wheelbase | 2, 845 mm |
| Power (kW) | 127 kW |
| Engine Power | 170 hp |
| Displacement | 7.5 L |
| PTO Power | 145 hp |
| PTO Speed | 540/1000 rpm |
| Engine | 6-cylinder turbocharged diesel |
Comprehensive guide to the engine fuel system, including testing and adjustments.
Procedures for safely removing and installing the engine from the tractor.
Detailed steps for disconnecting the transmission from other major assemblies.
Procedures for disconnecting the rear axle from the transmission unit.
Covers the mechanical aspects, disassembly, and reassembly of the transmission.
Details on the hydraulic components and operation of the transmission.
Explains the electrical controls, sensors, and diagnostics for the transmission.
Covers the Dana front axle, including operation, adjustments, and repair.
Information on the Carraro front axle, including disassembly and adjustments.
Comprehensive guide to rear axle assembly, differential, and related systems.
Information on power brake system components, operation, and troubleshooting.
Procedures for testing hydraulic system pressure and flow rates.
Calibration, diagnostics, and troubleshooting for EHR hydraulic systems.
Details hydrostatic steering system, components, and service procedures.
Guide to understanding fault codes and performing electrical system diagnostics.
To Next Page