New Holland Boomer 50 User Manual

7 - MAINTENANCE
Brake pedal free play - Check
To check brake pedal free play, do the following:
1. Depress brake pedal(s) until a resistance is felt.
2. Measure the brake pedal travel from the at rest
position to the position (A) that resistance is felt.
3. Brake pedal free play specication is 50.0 –
60.0 mm (1.96 – 2.36 in).
4. If measured free play is more than the specica-
tion, see 7-67 for adjustment procedure.
NOTE: Brake pedal free play should be equal for
both pedals.
NHIL16CT00457AA 1
Hydrostatic transmission (HST) neutral adjustment - Check
1. During the operation of the tractor, when the operator
removes his foot from the forward (1) or reverse (2)
HST pedal, the tractor should stop and the rear wheels
should not rotate.
2. Adjust the HST control linkage, if the rear wheels rotate
with the HST pedals in the neutral position.
3. To adjust HST control linkage, see 7-55.
NHIL16CT00413AA 1
7-30

New Holland Boomer 50 Specifications

General

Transmission	Hydrostatic
Fuel Capacity	11.9 gal
Lift Capacity	2, 756 lbs
Drive	4WD
PTO Speed	540 rpm