11 - FORMS AND DECLARATIONS
Check and inate tire air pressure to correct pressure. See 9-2.
Torque the wheel lug bolts to speciîš¿cation. See 7-26.
Front wheels toe-in, See 9-3 for correct speciîš¿cation, Adjust if necessary.
4. OPERATIONAL CHECKS
Perform all operating checks with the tractor at normal operating temperature.
Indicator Lights and gauges for proper operation
Key switch operation
Maximum no-load high and idle speeds, See9-3
PTO engagement and disengagement
Three point hitch operation
Hydraulic lift control drop rate adjustment
Four Wheel Drive (FWD) operation
Operation and adjustment of brakes
Hydrostatic transmission (HST)/Mechanical transmission operation
Operation of air conditioning / heating system
No uid or oil leaks
Perform a forced regeneration. See4-8 to perform this operation.
5. OTHER
Check for proper installation of the following items.
Air cleaner element & hose connections
Engine belts tension adjustment
Battery fully charged
Top link
Draw bar
The above pre-delivery service was performed and corrective action taken as required.
Dealer Representative's Signature:
"I have been instructed in the operation, maintenance, and safety features of this machine as detailed in the
operator's manual."
Owner's Signature Date
Remove this pre-delivery report and retain for future reference.
11-2
To Next Page
Loading...
Need help?
General
