EasyManuals Logo

New Holland CX840 User Manual

New Holland CX840
600 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
SECTION 1 – GENERAL INFORMATION AND SAFETY
1–11
Operating the attachments
1. When coupling an attachment to the base unit,
never stand between the machine and the
attachment.
2. Make sure that no one is standing in front of the
machine when detaching an attachment.
3. Before operating the attachment, make sure that
there is no one on or near the machine.
4. Never attempt to remove crop or residues from a
plugged attachment while the machine is
running. Such an imprudence could cost life or
limb. In the event of a blockage, always
disengage the threshing mechanism, switch off
the harvester engine and apply the parking brake
before clearing the blockage.
Stopping the combine
1. Always lower the attachment to the ground when
parking the machine.
2. For safety’s sake never leave the operator’s
platform without first returning the ground speed
control lever to neutral, switching off the threshing
mechanism, engaging the parking brake and
stopping the engine. Furthermore, if leaving the
machine unattended, always remove the ignition
key and switch off the switch on the battery.
3. When parking, always try to leave the machine on
level ground and apply the parking brake. If the
ground is sloping, apply the parking brake and
wedge the wheels.
Maintenance
1. Follow the maintenance schedule with regard to
the machine servicing intervals.
Remember that the machine requires minor
attention from time to time. Also remember that
the time taken on maintenance will greatly extend
the life of the machine.
2. Never attempt to clean, lubricate or carry out any
adjustments on the combine while it is in motion
or while the engine is running.
3. Keep hands, feet and/or garments away from
moving parts. Check that all rotating parts are
correctly guarded.
4. Never work under the attachment without first en-
suring that the straw elevator hydraulic cylinder
safety latch is engaged or that it is securely sup-
ported on wooden blocks.
5. Always use suitable jack stands when carrying
out maintenance on the steering axle.

Table of Contents

Other manuals for New Holland CX840

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the New Holland CX840 and is the answer not in the manual?

New Holland CX840 Specifications

General IconGeneral
BrandNew Holland
ModelCX840
CategoryFarm Equipment
LanguageEnglish

Related product manuals