SECTION 8 -- SPECIFICATIONS
8--10
STEERING
Hydrostatic control, independent circuit.
Metalic cartridge oil filter, fitted in oil reservoir.
Gear pump operated directly by the engine :
-- pumptype: C25*RP........................................................................
-- pump speed with engine at max. power : rev/min 2328............................................
-- corresponding flow : dm
3
/min / l/min (gal/min) 26.5 (5.8)...........................................
-- pressure relief valve calibration :
All 2WD models: 100 bar (1450 Psi, 102 kg/cm
2
)............................
All 4WD models: 125 bar (1813 Psi, 127 kg/cm
2
)............................
-- minimum turning radius, two--wheel drive models : without brakes
TD 60D, TD 70D models : 3.8 m (12.5 ft)............................
TD 80D, TD 90D and TD 95D models : 3.9 m (12.8 ft)............................
4WD FRONT AXLE
Central pivoting axle and co--axial transmission shaft on the longitudinal axis of the tractor. No universal joints
on transmission shaft. Differential with two planetary pinions.
Bevel gear pair ratios :
-- model TD 60D and TD 70D : 9/38.............................................................
-- model TD 80D, TD 90D and TD 95D : 9/39.....................................................
Minimum turning radius (m):
TD 60D, TD 70D TD 80D, TD 90D, TD 95D
4WD engaged
brake assisted 3.6 4.1
without brakes 5.3 5.6
4WD disengaged
brake assisted 4.2 4.5
without brakes 4.9 5.1
To Next Page
Loading...
