SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--43
CHECKS BEFORE USING THE TRACTOR
Before using the tractor, check that you are familiar
with the position and function of all the tractor
controls.
Ensure that the maintenance and lubrication
operations described in Section 3 of this Manual are
fully carried out.
After daily maintenance, carry out a visual inspection
of the outside of the tractor , paying particular
attention to the following points :
1. Signs of cracking on the fan belt.
2. Accumulation of dirt around the engine.
3. Signs of leaks or damaged components
connected to pressure tubes, sleeves and
connectors.
4. Damaged tyres.
5. Loose fasteners.
6. Accumulation of dirt on, or leaks from, the
hydraulic pump and connected parts.
Always carry out any necessary repairs before using
the tractor again.
To Next Page
Loading...
