If you need to manually enter your IP address to access 9.
your network, choose the “Enable” option from the drop-
down menu, click “Next” and fill in the appropriate infor-
mation. Otherwise, set it to “Disable” and click “Complete”
to finish the account setup.
To connect to the network, click on the “Profile Setting” 10.
tab. Select the profile you wish to use by clicking on the
name, then click the “Connect” button.
Basic information about the wireless connection, such as 11.
signal strength, is located on the “Link Information” tab.
To Next Page
Loading...
Need help?
General