Troubleshooting/FAQ
PROBLEM:
Network connection frequently drops.
SOLUTION:
Some wireless frequencies and channels are more common
than others, resulting in interference. Try changing your
wireless router’s channel (1-11) and/or frequency. Make
sure these settings are matched in your wireless devices.
PROBLEM:
Can’t connect to wireless network with hidden SSID.
SOLUTION:
The MaxPower 802.11n/g/b PCI Card does work properly
with SSID disabled. When you first startup , it will usually
take 5-10 seconds for the MaxPower 802.11n/g/b PCI Card to
automatically find and reconnect to the network that is us-
ing SSID disabled settings.
PROBLEM:
My current router is set for 5GHz, and I am unable to connect.
SOLUTION:
The MaxPower 802.11n/g/b PCI Card only runs at 2.4GHz. In
order to use this card with your wireless network, you will
need to set your router (and all other devices on this net-
work) to run at 2.4GHz.
PROBLEM:
I need to save settings for multiple networks.
SOLUTION:
You can save multiple profiles for different networks by re-
peating the same steps for the first connection you created.
Once you have saved the profile, you can click
on the Profile Manager and select the profile
you wish to connect with.
To Next Page
Loading...
Need help?
General