Need help?Do you have a question about the Newport Electronics IDP INFINITY D and is the answer not in the manual?
General| Series | IDP INFINITY D |
|---|---|
| Input | Thermocouple, RTD |
| Output | Relay, Analog, RS-485 |
| Power | 24 VDC or 100-240 VAC |
| Measurement Range | Depends on input type |
| Sampling Rate | 10 samples per second |
| Communication Interface | RS-485 |
| Power Supply | 100-240 VAC |
| Operating Temperature | 0°C to 50°C |
Outlines the manual's purpose: to guide users through setting up and using the process meter.
Explains the labeling system used in the manual for important information, warnings, and cautions.
Guides users on how to unpack the device and verify all components are present.
Details critical safety precautions and warnings for operating and installing the meter.
Describes the front panel components, including the display and operating modes.
Details the connectors on the rear of the meter for power and input/output signals.
Provides steps for disassembling the meter to access internal components like jumpers.
Explains how to set the internal DIP switches (jumpers) for initial meter configuration.
Instructions and dimensions for panel mounting the process meter.
Detailed guides for wiring various sensor inputs, including voltage and current types.
Step-by-step instructions for connecting AC and DC power supplies to the meter.
Procedure for choosing the correct input signal range (e.g., voltage or current).
Guide on how to select the display position for the decimal point.
Introduces internal and live scaling for calibrating meter readings.
Step-by-step guide for internal scaling using predefined low and high values.
Step-by-step guide for live scaling using actual input signals.
Instructions for recalibrating the meter, requiring external test equipment.
Instructions for modifying power jumpers to set the meter for 115V or 230V AC operation.
Provides tables for understanding meter display messages and configuration menu options.
Lists tables for run mode displays and default factory settings.
Details electrical, input, and environmental specifications for the meter.
Provides physical dimensions, panel cutout, and mounting information.
Explains the meter's compliance with relevant European directives for safety and electromagnetic compatibility.
Outlines the process for returning the product for warranty service or repair inquiries.
Lists global contact details, phone numbers, and websites for technical support and sales.
To Next Page
