8
6 Transom Mount Usage
Before the installation, make sure the area between
column and bracket is clear.
1. Tilt Position Lever - This lever allows the user to adjust the tilt (angle)
of the motor. Push tilt position lever, adjust tilt of motor, release lever.
2. Steering Tension Adjustment -To adjust the steering resistance, sim-
ply tighten or loosen the tension knob located on front of the mount.
3. Depth Adjustment Collar -The depth of the motor can be adjusted
up and down by loosening the depth collar tension knob located on
the column directly above the mount. The column can be adjusted
and the motor can be positioned at the desired depth by re-tighten-
ing the tension knob.
4. Transom Screws -The transom clamp screws allow for easy motor
removal and installation. Mount your motor on the transom then
tighten the transom clamp screws securely.
1. Tilt Position Lever
Adjustment
4. Transom Mount
Screw
3. Depth Adjustment
Collar
To Next Page
Loading...
Need help?
General
