MCS260
CORNERSTONE 260 MONOCHROMATORS
35
10.1 UTILITY SOFTWARE
LabVIEW-based utility software is included at no extra cost with all Cornerstone models to control
both the monochromator and filter wheel accessory. The utility software provided with the
monochromator includes USB drivers for Windows 7 32-bit and 64-bit operating systems. The
software can also control the instrument through an RS232 or GPIB connection.
Please refer to the Quick Start Guide provided with the monochromator for instructions on
installation and use.
Figure 26: Mono Utility Software Screens
To Next Page
Loading...