MCS260
CORNERSTONE 260 MONOCHROMATORS
36
10.2 HAND CONTROLLER
The optional 74009 Hand Controller is designed specifically for use with Oriel’s Cornerstone series
monochromators and MS260i spectrographs. It is very easy to set up – simply plug it into the
instrument and it’s ready to go. There is no need to purchase a computer and set up the software.
The Hand Controller is a very convenient option in locations where security is a concern, such as
defense facilities and universities.
There is no need to memorize commands or key sequences. The 24 keys are clearly labeled with
functions like “Shutter”, “Go Wave” and “Filter”. The backlit LCD display provides information on
the grating selection, grating line density, active filter position, current wavelength and shutter
status. Using the Hand Controller is intuitive and provides access to nearly all the functionality of
the monochromators and spectrographs. It comes with a 14 foot [4.3 meter] long cable.
Hand Controller commands are listed in the Appendix of this user’s manual.
Figure 27: Cornerstone 260 Monochromator with 74009 Hand Controller
To Next Page
Loading...