11
To use click the Add New IP Source menu, select a source type from the
dropdown list provided.
This opens a dialog suited to the particular source device you wish to
add, such as one of the numerous supported PTZ camera brands and
models, as shown in Figure 8.
Note: After adding an IP source, you must exit and restart the software for the new settings to be applied.
Additional protocols have been added to provide more options for video sources. RTMP (Real Time Message
Protocol), a standard for delivering your streams to your online video platform. RTSP (Real Time Streaming
Protocol), used for establishing and controlling media sessions between end points. Also included is SRT Source
(Secure Reliable Transport) which is an open source protocol that is managed by the SRT Alliance. It can be
used to send media over unpredictable networks, like the Internet. More information about SRT can be found
at srtalliance.org
To Next Page
Loading...
Need help?
General