Using the Programmer/Clock Continued.....
24
7
8
9
10
11
12
Fully automatic cooking
(example)
This programming method is best suit-
ed for when a delayed start time is
required. Unlike the semi automatic
methods this requires both the dura-
tion and the end time to be entered.
The timer will work out the start time
and begin cooking.
Press the ‘Function’ button twice to
select the length of time your food will
need. (7)
The ‘A’ on the left hand side will
flash and the ‘dur’ message will flash
up. (8)
Using the ‘Plus’ and ‘Minus’ buttons
set the time you require within 5 sec-
onds of the ‘dur’ message. (9)
Press the function button three times
until the ‘A’ flashes again and the
‘End’ messages appears. (10) &
(11)
Using the ‘Plus’ and ‘Minus’ buttons,
set the time you would like the oven to
switch off. (12)
Set the temperature of the oven and
place the food inside. While the auto-
matic function is running, the ‘A’ will
appear statically on the display, with
the time.
Try to keep the end time as close to
when you expect to return, this will
prevent cooked food from being left
standing in a warm oven. The timer
will calculate the appropriate start
time.
To Next Page
Loading...
