EasyManua.ls Logo

Nexgrill 922210 - User Manual

Nexgrill 922210
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SERIAL # ____________________ MFG. DATE _____________ PURCHASE DATE: ____________
19000590A3
In the State of Massachusetts, the following installation instructions apply:
Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or
licensed
by the State of Massachusetts.
If using a ball valve, it shall be a T-handle type.
A flexible gas connector, when used, must not exceed 3 feet.
Model No: 720/730-0882S
FOR OUTDOOR USE ONLY
Outdoor Gas Grill
ITM. / ART. 922210
Model #: 720/730-0882S
OPERATION INSTRUCTIONS
IMPORTANT,RETAIN FOR
FUTURE REFERENCE: READ
CAREFULLY
Gril à gaz extérieur
ITM. / ART. 922210
Modèle : 720/730-0882S
INSTRUCTIONS DE
FONCTIONNEMENT
IMPORTANT, CONSERVER POUR
RÉFÉRENCE FUTURE : LIRE
ATTENTIVEMENT
Parilla De Gas Para Exteriores
ITM. / ART. 922210
Numero de Modelo: 720/730-0882S
INSTRUCCUONES DE
OPERACIÓN IMPORTANTE,
RETIENE ESTE MANUAL PARA
REDERENCIA: LEA
CUIDADOSAMENTE
State of California Proposition 65 Warnings:
WARNING: To operate, this equipment requires the use of propane gas, which contains the chemical Benzene
which is known to the State of California to cause cancer and other reproductive harm.
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or
other reproductive harm.

Questions and Answers

  • J
    Jordan MooreAug 21, 2025
    What to do if my Nexgrill Gas grill won't light immediately?
    • J
      jonesnicholasAug 22, 2025
      If your Nexgrill Gas grill doesn't light immediately, first ensure you have a spark while trying to light the burner. If there's no spark, check if the battery is properly installed and that the wire is connected to the electrode assembly. Clean the wire(s) and/or electrode with rubbing alcohol and a clean swab, then wipe with a clean cloth. Check if the other burners operate; if so, inspect the gas orifice on the malfunctioning burner for any obstructions.
  • B
    brownlonnieSep 4, 2025
    What to do if my Nexgrill Grill only heats to 200-300 degrees?
    • N
      Norma BennettSep 4, 2025
      If your Nexgrill grill only heats to 200-300 degrees, check the fuel hose for bends or kinks. Ensure the grill area, burner, and orifices are free of dust, spiders, and insects. The regulator might have a safety device activated, restricting gas flow even without a leak. To reset it, turn off all burners, close the LP tank valve, disconnect the regulator, wait one minute, reconnect, slowly open the LP tank valve fully, then light all burners and check the temperature.
  • D
    David MooneySep 2, 2025
    What to do if Nexgrill 922210 cover doesn't fit?
    • J
      Joe HayesSep 3, 2025
      If the full-size cover doesn't fit your Nexgrill grill, it might be the wrong cover or a tight fit. Ensure it's the correct length by measuring it left to right and comparing it to the grill's measurement. Compare the hood portion's location and size to your grill. Spread the cover and let it relax, preferably in warm sunlight or a warm room. For grills with a side shelf, bunch the cover like a sock, and put it on from left to right.
  • J
    James RobertsSep 1, 2025
    Why does my Nexgrill 922210 Grill take so long to preheat?
    • S
      Susan FoxSep 1, 2025
      If your Nexgrill grill takes a long time to preheat, remember that cold weather and wind can affect preheating. Normal preheating to 500-600°F should take about 10-15 minutes. Volcanic rock or briquettes can also increase preheat time and maximum temperature.
  • S
    Stacey HicksAug 30, 2025
    Why does my Nexgrill Grill only heat to 200-300°F?
    • V
      Virginia ChavezAug 31, 2025
      If your Nexgrill grill only heats to 200-300°F, it might be due to the regulator's safety device restricting gas flow. First, check the fuel hose for bends or kinks. Ensure the grill area, burner, and orifices are clean and free of obstructions like spiders or insects. To reset the safety device, turn off all burners and close the LP tank valve. Disconnect the regulator from the LP tank and wait one minute. Reconnect the regulator to the LP tank and slowly open the LP tank valve fully. Light all burners and observe the temperature.
  • M
    Meghan WatsonAug 29, 2025
    What to do if the rotisserie burner on my Nexgrill 922210 Grill won't light?
    • J
      Jennifer SmithAug 29, 2025
      If the rotisserie burner on your Nexgrill grill won't light when you push the igniter button: * Check for debris blocking the electrode. * See if a spark jumps from the electrode to the burner. If there's no spark, check the battery inside the igniter box by turning it counterclockwise. Also, ensure the gas is on.
  • M
    martinezallisonAug 27, 2025
    How to fix Nexgrill 922210 that will not light immediately?
    • S
      steeledebraAug 27, 2025
      If your Nexgrill grill doesn't light immediately, ensure you see a spark while lighting the burner. Check the battery installation and wire connection to the electrode assembly. Clean the wire(s) and electrode with rubbing alcohol and a clean swab, then wipe with a clean cloth. If other burners work, inspect the gas orifice on the malfunctioning burner for any obstructions.
  • J
    Jennifer AyersAug 27, 2025
    How to fix Nexgrill 922210 Grill rotisserie burner that won't light?
    • S
      Sheila BellAug 27, 2025
      If the rotisserie burner on your Nexgrill grill won't light when you push the igniter button, check for debris blocking the electrode. Also, check for a spark jumping from the electrode to the burner. If there's no spark, check the battery inside the igniter box by turning it counter-clockwise. Finally, if the infrared back burner does not light when attempting to light with a match, ensure the gas is on.
  • C
    Christopher MartinAug 25, 2025
    How to fix a Nexgrill 922210 Grill that won't light immediately?
    • S
      silvavalerieAug 25, 2025
      If your Nexgrill grill doesn't light immediately, ensure you see a spark while lighting the burner. Check the battery installation and wire connections to the electrode assembly. Clean the wires and electrode with rubbing alcohol and a clean swab, then wipe with a cloth. Check if other burners operate; if so, inspect the malfunctioning burner's gas orifice for obstructions.
  • M
    Monica StoneAug 23, 2025
    What to do if the rotisserie burner of my Nexgrill Gas grill will not light?
    • B
      Brian WilsonAug 23, 2025
      If the rotisserie burner on your Nexgrill Gas grill won't light when pushing the igniter button, check for debris blocking the electrode. Verify there's a spark jumping from the electrode to the burner. If no spark is seen, check the battery inside the igniter box. Also, check to ensure the gas is on.

Nexgrill 922210 Specifications

General IconGeneral
TypeGas Grill
Fuel TypePropane
Number of Burners5
MaterialStainless Steel
Side BurnerYes
Grate MaterialPorcelain-Coated Cast Iron
Ignition TypeElectronic
Warranty1 year

Related product manuals