PRESET
IDS110 - IDS210 - Accessories Page 7 / 14
PRESET
Please consult nexo-sa.com for NEXO TD Controllers firmware information.
There are two setting ranges for surrounding speakers IDS110 and IDS210:
→ setups (available on NXAMP and DTD); For a traditional use of the subwoofer in omnidirectional radiation (require at
least one subwoofer and a channel of amplifier).
→ setups (only available on NXAMP); For a directional use (cardioid) of subwoofers (require at least two subwoofers
and two channels of amplifier):
• ointed at the audience
•
CROSSOVER FREQUENCY
Choose the crossover frequency value to application:
• 85 Hz Recommended for a use with speakers type PS or PLUS serie.
• 120 Hz Recommended for a use with speakers type ID24.
To Next Page
Loading...
