DESCRIPTION
Page 6 / 14 IDS110 - IDS210 - Accessories
DESCRIPTION
→ The IDS110 and the IDS210 are two compact and powerful subwoofers, ideally complementing the ID24 speakers. Their low-
profile design is elegant, and allows placement in various
→ ID
→
→ Versions:
• IDS110t: for ; Handles M20 threaded base; Black, white.
• IDS110i: for fixed installation; Black, white.
• IDS210t: M20 threaded base; Black, white.
• IDS210i: for fixed installation; Black, white.
→ Connectors:
• IDS110t / IDS210t: equipped with two Speakon NL4 connectors with parallel-wired pins, one on each side and two
on the back. The 1+/1- pins are used by the sub.
• IDS110i / IDS210i: The subwoofer is supplied with a fixed cable (HO7ZZ-F), 2 x 2.5mm2 section, length 2m, outside
diameter 9mm ±1mm.
(+) : Red / Brown ; (-) : Black / Blue
→ Amplification
• The IDS110 and IDS210 subwoofers MUST be used with a NEXO processor to handle EQ, phase alignment,
crossover and excursion/thermal protection for the system loudspeakers. There are two NEXO processor series
supporting the IDS110 and IDS210 subwoofers: NXAMP (4-channel) amplified processors and DTD processors DTD
(stereo + sub). DTD processors ensure optimal performances when used with DTDAMP power amplifiers (IDS110
only).
• The following table shows the number of IDS110 / IDS210 subwoofers usable with each solution.
To Next Page
Loading...
