Need help?Do you have a question about the Nexo RS Series and is the answer not in the manual?
General| Nominal Impedance | 8 Ohms |
|---|---|
| Weight | 35kg |
| Driver Size | 18" |
| Enclosure Type | Bass Reflex |
| Components | 1 x 18" driver |
| Recommended Amplifiers | 1000W - 2000W |
| Connectors | 2 x Neutrik NL4 |
| Construction | Birch plywood |
| Frequency Response | 35Hz - 150Hz |
| Sensitivity | 98dB |
Covers precautions against water, sun exposure, and operating temperature limits.
Emphasizes understanding rigging, stacking, and mounting safety rules for personnel.
Details OSHA guidelines for noise exposure and recommends hearing protection.
Details Speakon connector wiring for RS15 and RS18 cabinets.
Introduces NS-1 as a R&D simulation tool for system design and optimization.
Emphasizes safety precautions for rigging and general system handling.
Provides detailed safety rules for flying RS loudspeaker systems.
Outlines safety measures for ground-based stacking of PA systems.
Provides specific setup guidance for the RS15 subwoofer.
Offers specific setup guidance for the RS18 subwoofer.
Guides on how to fly RS15 clusters, including rigging points and hoist rating.
Guides on flying RS18 clusters, including rigging and hoist requirements.
Explains the 'steering' technique using delays to adjust vertical coverage of arrays.
Guides on aligning RS subwoofers with main speaker systems using reference points.
Lists detailed technical specifications for the RS15 subwoofer.
Lists detailed technical specifications for the RS18 subwoofer.
To Next Page
