Need help?Do you have a question about the Nexo RS18 and is the answer not in the manual?
General| Type | Subwoofer |
|---|---|
| Driver Size | 18 inches |
| Impedance | 8 Ohms |
| Enclosure Type | Bass Reflex |
| Sensitivity | 105 dB |
| Connectors | 2 x NL4 |
Guidelines for securely mounting the speaker system and its components.
Safety measures for connecting and powering the audio system and speakers.
Procedures for installing the rigging plate on the RS18 subwoofer.
Details on how to connect speakers to the RS18 system.
Procedures for installing the rigging plate on the RS18 subwoofer.
Instructions for attaching the RS18 to the dolly for transport.
Instructions for attaching the RS18 to the wheel board for transport.
Details on how to connect speakers to the RS18 system.
Recommendations and guidelines for selecting appropriate speaker cables.
Practical examples illustrating cable length calculations for RS18.
Recommended amplifier specifications for RS18 in Omni and Directional modes.
Importance of amplifier current capacity and testing procedures for low load conditions.
Key considerations for setting amplifier gain and practical methods to determine it.
Details on the NXAMP series controllers and their power capabilities for RS18.
Description of connectors found on the rear panel of NXAMP controllers.
Recommended configurations for RS18 with NXAMP controllers in Omni and Directional modes.
Availability of RS18 setups for NXAMP TD controllers and update information.
Connection diagram for RS18 with the NX242-ES4 TD controller.
Connection diagram for RS18 with the NXAMP4x4 controller.
Critical safety warnings and precautions for rigging and flying the RS18 system.
Specific safety considerations for flying RS18 systems in suspended arrays.
Safety guidelines for safely stacking RS18 cabinets on the ground.
Contact information for training agencies and industry associations related to rigging.
Information on appropriate hoist ratings based on the number of RS18 units in a cluster.
Step-by-step guide to connecting the first RS18 to the rigging bumper.
How to adjust rigging points to ensure the bumper remains horizontal.
Steps for attaching and flying additional RS18 cabinets in an array.
Discusses challenges in controlling low-frequency coverage and radiation.
Advantages of gradient subwoofers, including front-to-rear attenuation and room mode sensitivity.
Strategies for merging left/right subwoofer arrays into a monophonic system for improved coverage.
Considerations for stereo subwoofer array design to minimize interference and optimize coverage.
Guidelines for implementing the RS18 in omnidirectional mode.
Use cases and coverage characteristics of a single RS18 in omni mode.
Guidelines for array implementation in omnidirectional mode.
Guidelines for implementing the RS18 in directional modes.
Characteristics of a single RS18 in directional mode.
Various configurations for pairing RS18 subwoofers in directional mode.
Guidelines for flying RS18 arrays in directional mode.
Techniques for steering RS18 arrays to adjust coverage patterns.
Explanation of the steering technique using delays to tilt coverage.
How to implement delay values for steering coverage up or down.
Illustrates coverage results with steered delay sequences.
Procedures for aligning RS18 systems with main PA systems.
Definition of acoustic reference points for NEXO systems alignment.
Important precautions when using auxiliary sends for subwoofers and time alignment.
Method for aligning systems using distance measurements and delay calculations.
Using phase measurement for reliable system alignment.
List of essential tools and equipment for system installation.
Verifying the correct configuration of NX digital TD controllers.
Checking the proper configuration of the amplifiers.
Ensuring correct physical connections between amplifiers and NX controllers.
Verifying the correct connection and functionality of the RS18 speakers.
Performing final checks before initiating sound checks.
Overview of RS18 product features and system specifications with controllers.
Dimensional drawings and measurements of the RS18 subwoofer.
List and details of available accessories for the RS18.
Technical specifications and dimensions for the RS18 bumper accessory.
Technical specifications and dimensions for the RS18 push-pin accessory.
Technical specifications and dimensions for the RS18 flying plates accessory.
Technical specifications and dimensions for the RS18 front wheel board accessory.
Technical specifications and dimensions for the RS18 dolly accessory.
Technical specifications and panel views for the NX242-ES4 Digital TDController.
Technical specifications for NXAMP4x1 and NXAMP4x4 powered digital controllers.
List of main modules and control electronics for the RS18 system.
Detailed list of all available accessories for the RS18.
To Next Page
