Nexo NX242

ENGLISH
PAGE 37
APPENDIX A : LIST OF SUPPORTED PRESETS (LOAD2.22)
Appendix A : List of Supported presets (LOAD2.22)
At the time of printing, the following factory presets are supported by LOAD 2_22. Please refer to the
release notes if the software loaded in your NX242 is not LOAD 2_22.
Keep in mind that you should hold the A & B buttons down when resetting the NX242 to switch from one
family of setups to the other.
Setup Name CH 1 CH 2 CH 3 CH 4
CD18
CD18 SUPERCARDIO
Crossover 75HZ
CD18 # 1 back CD18 # 1 front CD18 # 2 back CD18 # 2 front
CD18 SUPERCARDIO
Crossover 100Hz
CD18 # 1 back CD18 # 1 front CD18 # 2 back CD18 # 2 front
CD18 CARDIO
Crossover 75HZ
CD18 # 1 back CD18 # 1 front CD18 # 2 back CD18 # 2 front
CD18 CARDIO
Crossover 100Hz
CD18 # 1 back CD18 # 1 front CD18 # 2 back CD18 # 2 front
CD12
2xCD12 Flown
STEREO(1-2)(3-4)
CD12 # 1 back CD12 # 1 front CD12 # 2 back CD12 # 2 front
2xCD12 Ground
STEREO(1-2)(3-4)
CD12 # 1 back CD12 # 1 front CD12 # 2 back CD12 # 2 front
S2
4 S2 cabinets
S2-63 Hz
S2 # 1 S2 # 2 S2 # 3 S2 # 4
4 S2 cabinets
S2-80 Hz
S2 # 1 S2 # 2 S2 # 3 S2 # 4
AlphaE stereo
AlphaE Stereo
AEM + B1-18
B1-18 Left B1-18 Right AEM Left AEM Right
AlphaE Stereo X
AEM + B1-18xover
B1-18 Left B1-18 Right AEM Left AEM Right
AlphaE Mono
ALPHAE Mono
AEM B1-18 S2-63
S2 B1-18 AEM -
ALPHAE Mono
AEM B1-18 S2-80
S2 B1-18 AEM -
AlphaE Active
ALPHAE ACTIVE 3W
B1-18 MF HF
- B1-18 AEM-MF AEM-HF
ALPHAE ACTIVE 4W
S2 B1-18 MF HF
S2 B1-18 AEM-MF AEM-HF
Alpha
ALPHATD B1+M3
No SubTD
- B1-15 A-MF A-HF
ALPHATD S2+B1+M3
SubTD S2-63 Hz
S2 B1-15 A-MF A-HF
ALPHATD S2+B1+M3
SubTD S2-80 Hz
S2 B1-15 A-MF A-HF
USER MANUAL LOAD2_22
DATE: 03/12/2004