Need help?Do you have a question about the Nexo NXAMPmk2 Series and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Amplification Technology | Class D |
| DSP | Yes |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| THD | <0.1% |
| THD+N | <0.1% |
| Latency | 1.5ms |
| Input Impedance | 10 kΩ balanced |
| Dynamic Range | >120dB |
| Input Connectors | XLR |
| Output Connectors | Speakon NL4 |
| Network Control | Yes |
| GPIO | Yes |
| Cooling | Variable speed fan |
| Power Supply | Switching mode |
| Operating Voltage | 100-240 V, 50-60 Hz |
Guidelines for safe operation, installation, and maintenance of the TD Controller.
Covers power supply, water warning, abnormalities, location, connections, maintenance, and handling.
Information regarding FCC regulations and compliance for the product.
Statement of compliance with EU directives and FCC rules.
Welcome and overview of the NXAMPmk2.
Guidelines for mounting the NXAMPmk2 unit into a rack.
Recommendations for selecting appropriate speaker cables and gauges.
Details on the touch screen interface and rotary encoder functions.
Description of the air intake system for cooling the NXAMPmk2.
Description of audio inputs, power connectors, and air exhaust.
Description of expansion slot, RS232, and GPIO ports.
Placement of NXAMPmk2 in the audio chain.
Explains speaker cabling and output mode configurations for different speakers.
Step-by-step guide for turning on and starting up the NXAMPmk2.
Overview of channel settings like Volume, Delay, Gain, EQ, Array-EQs.
Access to menus for Scene, Remote Control, Monitoring, and Settings.
Configuration of network settings like IP address, device ID, and mode.
Monitoring parameters including alerts, logs, system headroom, and input/load monitoring.
Configuration options for groups, zones, screen, lock, GPIO, delay, output mode, energy saver.
Detailed list of global and per-channel alerts and their causes.
Description of the DPU's front panel connectors.
Description of the DPU's back panel connectors.
Instructions for connecting, starting up, and operating the DPU.
Guide on connecting multiple DPUs for advanced setups.
Explanation of the IP-based remote control protocol.
Introduction to the NEXO NeMo remote control software and its features.
Alternative remote-control clients and protocols for the NXAMPmk2.
Guide on updating the NXAMPmk2 firmware using NEXO NeFu software.
Description of the NXAEDT Dante/AES/EBU expansion card.
Description of the NXDT104MK2 Dante expansion card.
Description of the NXAE104 AES/EBU expansion card.
Description of the NXRM104 Ethernet remote control card.
Instructions for cleaning and maintaining the hardware of the NXAMPmk2.
Detailed power output specifications for different models.
Audio performance specifications like frequency response and input impedance.
Features available on the back panel of the NXAMPmk2.
Power consumption details for extension boards.
Overall physical dimensions of the NXAMPmk2 unit.
List of global and per-channel parameters that can be logged or trigger alerts.
License information for the Google Roboto font.
License information for the LWIP lightweight IP stack.
Guidelines for proper disposal of electrical and electronic equipment.
To Next Page
