Need help?Do you have a question about the Nexo NXAMP4x2mk2 and is the answer not in the manual?
General| Brand | Nexo |
|---|---|
| Model | NXAMP4x2mk2 |
| Category | Controller |
| Language | English |
Read this manual before using the TD Controller. Keep this manual available for further reference.
Guidelines for safe use of the power supply, cord, water avoidance, and abnormality handling.
Description of front panel components: cooling, display, and control encoder.
Details on back panel connectors: power outputs, expansion slot, and audio inputs.
Example of cabling for two speakers using 2+/2- connection and output mode settings.
Example of cabling for two subwoofers using 1+/1- connection.
Example for mixed cabling of one subwoofer and one passive speaker.
Overview of the channel settings interface, including meters and navigation.
Shortcuts for inactive view, locking, standby, and access to internal menus.
Quick access to channel setting pages like Inpatch, Meters, Volume, Delay, Gain, Array-EQs, EQ.
Details on the Meters page display and how to select speaker presets.
Procedure for assigning input signals to amplifier channels.
Steps for adjusting gain and delay for input signal alignment.
Procedure for verifying speaker connections and output signal integrity.
Instructions for adjusting the volume level for individual or multiple channels.
Guide to setting channel delay values for audio alignment.
Instructions for adjusting channel gain levels for optimal signal management.
Explanation of Array-EQ settings for optimizing speaker performance.
Method for selecting multiple channels to edit EQ parameters simultaneously.
Configuration of network settings for remote control (IP, Netmask, etc.).
List of all potential errors, alarms, and warnings displayed by the amplifier.
Function to measure speaker impedance and detect connection faults.
To Next Page
