NXAMPMK2 USER MANUAL PAGE 23 / 80
- Delay: Edit delay (up to 1 second) on one or several channels at once.
- Gain: Edit gain (-18 to +18 dB) on one or several channels at once.
- Array EQs: Two settings of Array-EQ allow for a better compensation of ground, stacking and line-array
effect, on Low and High frequencies.
- EQ: In addition to cabinet-related EQ and Array EQ. User EQ provides up to 8 bands per channel,
editable on one or several channels at once.
Operations for channel settings are precisely detailed in Channel settings section.
RESET TO FACTORY SETTINGS
To reset to factory settings, keep the encoder button pushed while resuming from standby.
By selecting Continue, factory settings will be reset, and the unit will reboot.
To Next Page
Loading...
