Nexo NXAMP4x2mk2

To Next Page

To Previous Page

PAGE 66 / 80 NXAMPMK2 USER MANUAL



Hardware maintenance

WARNING!

Always unplug the NXAMPmk2 from the main before cleaning it.

Regularly check the dust level of the air intakes of the NXAMPmk2. If some dust is inserted into the cooling

tunnel of the amplifier, use compressed air to remove it from the amplifier.

The chassis and the front panel can be cleaned using a dry cloth.

Main Page

Table of Contents2
Safety Precautions6
- Safety Instructions6
- Precautions7
Compliance Information9
- Fcc Informations (U.s.a.)9
- Doc10
- Informaton11
Packaging11
- Content11
- Weight11
Introduction12
- Rack Installation12
- Speaker Cable Choice12
- Front Panel Description13
- Back Panel Description13
- Audio Input and Output Connections17
Speaker Cabling & Output Mode18
- Configuration with Two Speakers 2+/218
- Configuration with Two Speakers 1+/119
- Configuration with One Speaker 1+/1- & One Speaker 2+/219
- Conclusion & 4-Channel Arrangement20
Amplifier Start-Up & Menu Descriptions21
- Amplifier Start-Up21
- Channel Settings21
- Header Menu22
- Reset to Factory Settings23
Channel Settings24
- Meters & Speaker Preset24
  - Speaker Preset Selection25
  - Use the Amplifier Without the Tdcontroller Functionality25
- Inpatch and Outpatch26
- Volume27
- Delay28
- Gain28
- Array-Eqs29
Internal Menus32
- Scene32
  - To Save a Scene33
  - To Recall a Scene33
- Remote Control34
- Monitoring37
- Settings37
Monitoring Menu38
- Alerts38
- Log38
  - Global Parameters39
  - Per-Channel Parameters39
- System Headroom40
- Load Monitoring40
- Input Monitoring43
Settings Menu45
- Remote Control45
- Groups & Zones45
- Screen & Appearance46
- Lock & Sleep47
- Gpio47
- Delay Unit50
- Output Mode50
- Energy Saver Enabled51
- Dpu Mode51
- Device Information51
Alerts List52
- Global52
- Per Channel54
Dpu Digital Patching Unit for Nxamp55
- Front Panel Description55
- Back Panel Description56
- Operating the Dpu57
Remote Control - Nexo Nemo61
- Ip Based Remote Control Protocol61
- Nemo (Nexo Remote): Nxampmk2 Control Software61
- Other Remote-Control Options62
Firmware Update - Nexo Nefu63
Accessories64
- Nxaedt64
- Nxdt104Mk264
- Nxae10464
- Nxes10464
- Nxrm10465
- Dmumk265
- Dpu65
Maintenance66
Technical Specifications67
Thermal Dissipation and Current Drawn68
- Extension Board Consumption68
- Nxamp4X1Mk268
- Nxamp4X2Mk270
- Nxamp4X4Mk271
Drawings and Dimensions73
Log and Alert Parameters74
License Information76
- Google Roboto Font76
- Lwip - Lightweight Ip Stack76
Weee Information77
- Information for Users on Collection and Disposal of Old Equipment77
- Verbraucherinformation zur Sammlung und Entsorgung Alter Elektrogeräte77
- Informations Concernant la Collecte et le Traitement des Dechets D'equipements Electriques et Electroniques78
- Informacion para Usuarios sobre la Recogida y Eliminacion de Los Equipos Antiguos78
User Notes79

Table of Contents

Other manuals for Nexo NXAMP4x2mk2

Related product manuals