Need help?Do you have a question about the Nexo PS 8 and is the answer not in the manual?
General| Type | Passive Speaker |
|---|---|
| Nominal Impedance | 8 Ohms |
| Enclosure Material | Baltic Birch Plywood |
| Tweeter Size | 1" |
| Weight | 7.5 kg |
| Recommended Amplifier Power | 250 to 500 Watts @ 8 Ohms |
| Components | 1 x 8" woofer, 1 x 1.4" compression driver |
| Connectors | 2 x NL4MP SPEAKON |
Covers general safety advice, precautions against water exposure, and system deployment rules.
Guidelines for safe installation, rigging, stacking, and pole mounting of speaker systems.
Covers essential safety instructions for operating NEXO TD controllers, including handling and environment.
Highlights risks of electric shock, fire, and importance of proper grounding and maintenance.
Information on potential hearing loss from high noise levels and permissible exposure limits.
Guidelines for the correct disposal and recycling of old electrical and electronic equipment.
Critical safety guidelines for handling and installing PS Series hardware, emphasizing care and inspections.
Safety rules and considerations for stacking PA systems on the ground to prevent injuries.
Overview of connecting plates and crucial warnings regarding the use of PS Series accessories.
Detailed procedures for installing PS Series in fixed and touring applications.
Procedures for testing rigging components and maintaining the PS Series system for longevity.
States compliance with EU and US safety and EMC standards for TD controllers.
Crucial safety guidelines for operating and maintaining NEXO Analogue PSTD Controllers.
Guidance on mains power, voltage settings, rack mounting, and fuse replacement for TD controllers.
Operational instructions for the Analogue TDcontroller, including functions and front panel overview.
Detailed technical specifications for the PS8 speaker and LS400 subwoofer.
Detailed technical specifications for the PS10R2 speaker and LS600 subwoofer.
Detailed technical specifications for the PS15R2 loudspeaker.
Technical specifications for NEXO PS Analogue TDcontrollers.
List and details of accessories for touring applications, including U-brackets and flying adaptors.
List and details of accessories for fixed installations, such as wall and ceiling mounts.
Inventory list of PS Series modules and control electronics.
Comprehensive list of all available PS Series accessories with model numbers.
Introduces the NEXO PS Series speaker system and its components.
Describes the role of TDControllers and NXAMPs in controlling and amplifying PS Series speakers.
Instructions on how to connect PS Series speakers using Speakon NL4FC plugs.
Details on configuring the PS15 for passive or active mode and selecting appropriate speaker cables.
Guidance on choosing compatible amplifiers for PS and LS series speakers.
Explains the significance of amplifier current capacity for reactive speaker loads.
How to correctly set amplifier gain for optimal system alignment.
Procedure to check amplifier gain values, especially when unknown.
Explanation of Stereo, Bridge-Mono, and Parallel-Mono modes for two-channel amplifiers.
Caution against using amplifier's internal signal processing due to potential interference.
Details on integrating PS Series with NXAMP Powered Controllers.
Overview of the rear panel connectors for NXAMP4x1 and NXAMP4x4.
Recommended configurations for using NXAMP controllers with PS Series speakers.
Configuration parameters for PS Series using Analogue PS TDControllers.
Configuration parameters for PS Series using the Digital NX242-ES4 controller.
Configuration parameters for PS Series using NXAMP TDControllers.
Wiring diagram for connecting PS8/LS400 speakers with a PS8 TDController.
Wiring diagram for connecting PS8/LS400 speakers with an NXAMP4x1 amplifier.
Wiring diagram for connecting PS8/LS400 speakers with an NXAMP4x4 amplifier.
Wiring diagram for connecting PS10/LS600 speakers with a PS10 TDController.
Wiring diagram for connecting PS10/LS600 speakers with an NXAMP4x1 amplifier.
Wiring diagram for connecting PS10/LS600 speakers with an NXAMP4x4 amplifier.
Wiring diagram for PS15/RS15 speakers with a PS15 TDController.
Wiring diagram for PS15/RS15 speakers with an NXAMP4x1 amplifier.
Wiring diagram for PS15/RS15 speakers with an NXAMP4x4 amplifier.
Wiring diagram for PS15 Active speakers with an NXAMP4x4 amplifier.
Explains the asymmetrical dispersion characteristic of the PS Series horn.
Procedure for adjusting the horn orientation for different coverage patterns.
Default horn setup for optimal audience coverage, directing wide dispersion downwards.
Horn setup for stage monitoring, directing wide dispersion towards the top of the cabinet.
Critical safety guidelines for handling and installing PS Series hardware, emphasizing care and inspections.
Safety rules and considerations for stacking PA systems on the ground to prevent injuries.
Crucial warnings regarding the use of PS Series accessories, emphasizing using only NEXO parts.
List and description of accessories for fixed mounting, including U-brackets and wall mounts.
Procedure for rigidly mounting PS cabinets on walls or ceilings using U-brackets.
Specific procedures for mounting PS10R2 and PS15R2 speakers on ceilings.
Specific procedures for wall mounting PS10R2 and PS15R2 speakers.
Listing of accessories for touring setups, including U-brackets, flying adaptors, and lifting rings.
Instructions for safely mounting PS speakers on speaker stands or pole stands.
Procedures for flying PS Series cabinets vertically using flying bars and adaptors.
Procedures for flying PS Series cabinets horizontally using U-brackets and flying bars.
Procedures for testing rigging components and maintaining the PS Series system.
States compliance with EU and US safety and EMC standards for TD controllers.
Crucial safety guidelines for operating and maintaining NEXO Analogue PSTD Controllers.
Guidance on mains power, voltage settings, rack mounting, and fuse replacement for TD controllers.
Guidelines for signal and sense line wiring, including cable types and EMC considerations.
Information on EMC requirements and immunity for TD controllers.
Recommended cables for analogue signal connections to TD controllers.
Pre-operation checks, system functions, and front panel layout of the Analogue TDcontroller.
Adjusting the Subbass level and understanding amplifier and protection indicator LEDs.
How to set the peak limiter for the PS and SubBass amplifier sections.
Details on output level switch, audio/sense outputs, earth lift, and sub jumper settings.
Description of filtering, equalization, and crossover functions within the linear section.
Explanation of servo control mechanisms, including VCAs and VCEQs.
Details on displacement, temperature, and peak limiting features for speaker protection.
Detailed technical specifications for the PS8 speaker and LS400 subwoofer.
Physical dimensions and drawings for the PS8 speaker and LS400 subwoofer.
Response, impedance, and coverage diagrams for PS8 and LS400.
Detailed technical specifications for the PS10R2 speaker and LS600 subwoofer.
Physical dimensions and drawings for the PS10R2 speaker and LS600 subwoofer.
Response, impedance, and coverage diagrams for PS10R2 and LS600.
Detailed technical specifications for the PS15R2 loudspeaker.
Physical dimensions and drawings for the PS15R2 loudspeaker.
Response, impedance, and coverage diagrams for PS15R2.
Detailed technical specifications for NEXO PS Analogue TDcontrollers.
Layout and controls of the front and rear panels of the Analogue TDcontroller.
Details and dimensions of the touring U-bracket for PS8.
Details and dimensions of the touring U-bracket for PS10R2.
Details and dimensions of the touring U-bracket for PS15R2.
Details and dimensions of the flying rail for PS series speakers.
Details and dimensions of the lifting ring for U-brackets or flying rails.
Details and dimensions of the truss hook for U-brackets or flying rails.
Details and dimensions of the flying adaptor for PS8.
Details and dimensions of the fixed installation U-bracket for PS8.
Details and dimensions of the fixed installation U-bracket for PS10R2.
Details and dimensions of the fixed installation U-bracket for PS15R2.
Details and dimensions of the L-bracket for cable suspension for PS10R2/PS15R2.
Details and dimensions of the U-bracket for rigid suspension for PS10R2/PS15R2.
Details and dimensions of the wall suspension system for PS8 and PS10.
Details and dimensions of the wall suspension system for PS15R2.
To Next Page
