Need help?Do you have a question about the Nexo GEO S12 Series and is the answer not in the manual?
General| Brand | Nexo |
|---|---|
| Model | GEO S12 Series |
| Category | Speaker System |
| Language | English |
How to connect speakers using Speakon connectors and wiring diagrams.
Procedure to switch between passive and active modes using internal WAGO connectors.
Recommended amplifier power and impedance for GEO S12 cabinets in passive and active modes.
Information on using NEXO NXAMP4x1 and NXAMP4x4 controllers with GEO S12 systems.
Available setups for GEO S12 with NEXO subwoofers using NX242/NXAMP.
Details on using the analogue GEOS12 TDController with various system configurations.
Wiring diagram for connecting GEO S12 with NX242-ES4 in 4-channel passive mode.
Wiring diagram for connecting GEO S12 with NXAMP4x1 in bridge stereo passive mode.
Wiring diagram for connecting GEO S12 with NXAMP4x1 in bridge stereo active mode.
Wiring diagram for connecting GEO S12 with NXAMP4x4 in 4-channel passive mode.
Wiring diagram for connecting GEO S12 with NXAMP4x4 in stereo active mode.
Essential safety rules and precautions for rigging and deploying GEO S12 systems.
Safety rules for flying GEO S12 systems, including inspection and procedures.
Safety guidelines for building and securing ground stacked PA systems.
Guidelines for testing and maintaining the GEO S12 system and its rigging components.
Essential safety instructions for operating the TDcontroller and related audio equipment.
Advice on mains power, voltage setting, rack mounting, fuse, and wiring for the TDcontroller.
Guidance on resolving common issues with the NX242 controller.
Common errors in NX242 setup, including channel settings, amplifier power, gain, and delays.
Recommended NX242 setup for X-OVER and delay adjustments for mixed systems.
Checklist for verifying NX242 controller setup, including output assignment and parameters.
Checklist to ensure amplifiers are correctly configured for frequency band, mode, and gain.
Checklist to verify proper connection between amplifiers and NX242, focusing on sense lines.
Checklist for ensuring correct speaker connections and angles in arrays and clusters.
Final checks before performing a sound check, ensuring identical left/right channel output.
Technical specifications and panel overview for the analogue TDcontroller.
Technical specifications and panel overview for the NX242 digital TDcontroller.
To Next Page
