GEO S12 HARDWARE SETUP PROCEDURE Page 67/112
8.5 Testing and Maintenance of the system
• General: Geo is a precision piece of equipment and requires regular attention to maintenance in
order to give long and reliable service. NEXO recommends regular testing of loudspeaker rigging
components, preferably using a suitable test rig coupled with a visual inspection.
• Fasteners: there are several critical points in the GEO S12 cabinets.
• Of primary concern are:
• a) The grid screws attaching the grid to the cabinet
• b) The machine screws attaching the connecting plates to the cabinet.
• c) The screws attaching the directivity flanges to the front of the cabinet.
• These fasteners should be regularly checked and tightened as necessary.
• Cleaning: The exterior of the cabinet and the rigging system can be cleaned with a damp cloth
soaked in mild soapy water. On no account use solvent based cleaners , which may damage the
finish of the cabinet
• After cleaning, the rigging system must be treated with a suitable lubricant to prevent rusting.
NEXO recommends the use of Scottoil FS365 which is a water-based lubricant with a mixture of
machine oil, surfactant and anti-rust treatment.
To Next Page
Loading...
Need help?
General
