Page 46/112 GEO S12 HARDWARE SETUP PROCEDURE
8.4 GEO S12 in touring applications
8.4.1 Touring Accessories
Accessories are :
• Bumper (GEOS12-BUMPER)
• Rigging Plates (GEOS12-XBOW-V2)
• Tension Mode Link Bars for GEOS12-XBOW-V2 (GEOS12-TLB)
• Lifting Ring for GEOS12-SSBRK, GEOS12-PSBRK or GEOS12-TTC (GEOS12-XHBRK)
• Truss hook for GEOS12-SSBRK, GEOS12-PSBRK or GEOS12-TTC (GEOS12-TCBRK-V2)
• “U” Bracket for single horizontal GEO S12 on pole stand, lifting ring or truss hook (GEOS12-
SSBRK-V2)
• U” Bracket for two horizontal GEO S12 on pole stand, lifting ring or truss hook (GEOS12-
PSBRK-V2)
• Flying Bar for single vertical GEO S12 (GEOS12-TTC-V2)
• Ground Stacking device for up to 6 GEOS1210 (GEOS12-GSTK)
Please refer to section 13.3 of this manual for more information of above references.
GEOS12- BUMPER GEOS12-XBOW-V2
GEOS12-TLB GEOS12-XHBRK GEOS12-TCBRK-V2
GEOS12-SSBRK-V2 GEOS12-PSBRK-V2
GEOS12-TTC-V2 GEOS12-GSTK
To Next Page
Loading...
Need help?
General
