Next CORSICA - Step Three: Drawer Unit Construction; Step Four: Main Body Base; Step Five: Attaching Side Panels

1.Insert 2×cambolts(E) into panel 21 using a
screwdriver until tight.
2.Glue (C) and insert 2× wooden dowels (B) into
panels 18 & 17
3.Attach handle (K) to the panel 21 with screws
provided.
4.Attach panel 21 to panels 18 & 17.
5.Insert 2×camlocks (F) into panels 18 & 17.
Ensure the arrow indicator is pointing towards
the panel edge before tightening with a
screwdriver.
6.Repeat step one,two & three to assemble
the other drawer.
1.Insert 6xcambolts (E) into panel 11 & 10 by a
screwdriver until tight.
2.Insert 8xcambolts (E) into panel 1 by a
screwdriver until tight.
STEP THREE
STEP FOUR
1.Glue and insert 2x wooden dowels (A) into
panels 10&11
2.Attach panels 10 & 11 to panel 1.
3.Insert 4x camlocks (F) into panel 1 and tighten
with a screwdriver.
Ensuring the arrow indicator is pointing
towards the panel edge before tightening
with a screwdriver.
NB:We recommend that the
packaging is used to protect the
surfaces during assembly.
STEP FIVE
Page 3 of 8