Next CORSICA - Step Six: Inserting Back Panels; Step Seven: Dowel Insertion; Step Eight: Main Body Structure

1.slide panels 16 (X2) into the grooves of
panels 10 & 11
1.Glue and insert the 8
xwooden dowel (A)
into panels
14(x2)
.
1.Insert panels 14(x2) to panels 16(x2) then attach
panels 14 (x2) to panels 10 &11
STEP SIX
STEP SEVEN
STEP EIGHT
panels 14 (x2) to panels 10 &11
2.Glue and insert the 2xwooden dowel (A) into
panel 1.
3.Attach panel 13 to panel 14 ( which connect to
panel 11) & 1, make sure the panel 16 in the groove
of panel 13.
3.Attach panel 12 to panel 14 ( which connect to
panel 10) & 1, make sure the panel 16 in the groove
of panel 12.
6.Insert 2xcamlocks (F) into panels 12 & 13 and
tighten with a screwdriver.
Ensuring the arrow indicator is pointing
towards the panel edge before tightening
with a screwdriver.
Page 4 of 8