Next CORSICA - Step Nine: Attaching Side Supports; Step Ten: Securing Supports; Step Eleven: Attaching Top Panel

1.Glue and insert the 6
xwooden dowel (A)
into pnaels 10 & 11
2.Attach panel 7 on panel 10
3.Insert 1xcamlock (F) into panel 7and tighten with
a screwdriver.
4.Attached panel 8 on panel 11
5.Insert 1x camlock (F) into panel 8 and tighten with
a screwdriver.
Ensuring the arrow indicator is pointing
towards the panel edge before tightening
with a screwdriver.
STEP TEN
1.Tighten panel 7 to panel 12 with 2 x screws(H)
by using a screwdriver.
2.Tighten panel 8 to panel 13 with 2 x screws(H)
by using a screwdriver.
STEP NINE
STEP ELEVEN
1.Glue and insert the
2
xwooden dowel
s
(A)
into pnael 1
2.Attach panel 9 to panel 1.
3.Insert 2xcamlocks (F) into panel 9 and tighten
with a screwdriver.
Ensuring the arrow indicator is pointing
towards the panel edge before tightening
with a screwdriver.
Page 5 of 8