Next LEAMINGTON - User Manual

r
Tools Needed
Helpline
If you have any problems with this product or
require
any replacement fittings please contact Customer
Services Tel: 0333 777 8999
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is
found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging
IMPORTANT
• A minimum of persons persons is required to assemble this product.
PRODUCT INFORMATION
• Made from steel witha nickle powder coated finish and poplar sprung wooden slats.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• Do not use abrasive cleaning products or those containing silicone.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent
scratching or damage.
• Do not rub or scrub the surface when cleaning.
• Made in China.
CARE INSTRUCTIONS
• For general cleaning, periodically dust with a soft cloth.
• Do not put hot dishes directly on the surfaces of the item.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if
necessary.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration
or warping.
LEAMINGTON BED
(SINGLE)
Page 1 of 4

Next LEAMINGTON Specifications

General

Brand	Next
Model	LEAMINGTON
Category	Indoor Furnishing
Language	English

Summary

Assembly Instructions Overview

Important Pre-Assembly Notes

Key warnings and recommendations before starting assembly, including reading instructions and checking parts.

Product Details

Information about the bed's construction material, finish, and origin.

Care and Maintenance

Guidelines for cleaning, protecting surfaces, and maintaining furniture integrity.

Component Identification

Fittings List

Detailed list of all hardware components required for assembly, including bolts and washers.

Parts List

Identification of all main bed components, such as headboard, footboard, and side rails.

Assembly Steps

Step One: Attach Sliders

Instructions for attaching foot sliders to the headboard and footboard using specific bolts.

Step Two: Attach Side Rails

Procedure for connecting side rails to the headboard and footboard with bolts and washers.

Step Three: Install Sprung Slats

Guide to inserting sprung slats and securing them with caps into the side rails.

Step Four: Attach Finials

Final step to attach decorative finials to the top of the headboard and footboard.