Next RADCLIFFE - User Manual

r
Tools Needed
Helpline
If you have any problems with this product or
require
any replacement fittings please contact Customer
Services Tel: 0333 777 8999
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration
or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if
necessary.
• Do not rub or scrub the surface when cleaning.
• Do not use abrasive cleaning products or those containing silicone.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent
scratching or damage.
• Made in China.
CARE INSTRUCTIONS
• For general cleaning, periodically dust with a soft cloth.
PRODUCT INFORMATION
• Made from steel with black and chrome powder coated finish and poplar sprung wooden slats.
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is
found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging
IMPORTANT
• A minimum of persons persons is required to assemble this product.
RADCLIFFE BED(SINGLE)
Page 1 of 3

Next RADCLIFFE Specifications

General

Brand	Next
Model	RADCLIFFE
Category	Indoor Furnishing
Language	English

Summary

Important Assembly Information

Read and Follow Steps

Spend time reading through the leaflet and follow the simple step-by-step instructions.

Parts Check

Carefully check that you have all parts before beginning assembly.

Child Safety

Keep fittings out of children's reach and keep children away from the construction area.

Surface Protection

Use packaging to protect surfaces during assembly.

Product Details

Materials and Finish

Made from steel with black and chrome powder coated finish and poplar sprung wooden slats.

Origin

Product is made in China.

Care Instructions

General Cleaning

Periodically dust with a soft cloth; do not rub or scrub the surface when cleaning.

Cleaning Products

Do not use abrasive cleaning products or those containing silicone.

Spill Management

Remove spills immediately with a soft damp cloth and dry.

Surface Protection

Protect surfaces with mats and coasters to prevent scratching or damage.

Assembly Steps

Step One: Attach Side Rails

Attach side rails to headboard and footboard using bolts, plastic and metal washers.

Step Two: Insert Sprung Slats

Insert sprung wooden slats with caps into side rails, repeating for all components.

Step Three: Attach Finials

Attach finials to the headboard by turning clockwise by hand to tighten.