LA12 & LA12C User’s Guide
23
4. RIGGING SETUP
PROCEDURES
In curved arrays, the vertical scattering angles should vary according to the distance
from the listening point. For example, the scattering angle will be small for the farthest
positions and it will be gradually become bigger as the listening point gets nearer the
speaker systems. The maximum vertical inclination angle between two speakers is 8º.
4.1 FLOWN INSTALLATION
In case of a flown installation, proceed by hooking the first speaker system to the
flying bar, translate it upwards through the anchoring system (chains and/or motors), then
add the next speaker system. Pay attention to the correct introduction of the various quick-
release pins and, finally, make sure that the system is stable and well anchored.
To Next Page
Loading...
Need help?
General