GENERAL INFORMATION
GENERAL INFORMATION
Remote Control Operating Instruction
1. Set top box control section: press the key, the RCU will send out the default remote codes.
2. TV section search functions:
a) Press both keys VOL+ and VOL- at the same time, after 3 seconds, it can enter
into the TV search status.
b) Press the VOL+ key send out 3 group of code values and go forward to search. While
the TV appears "volume" symbol, please loosen the key. Press the VOL- key and go
afterward to search.
3.STB manufacturer has tried including most popular more than 130 LED, LCD, Plasma and
CRT TV's remote controller codes. Due to the limitation it is not possible to include whole
models. Function is restricted by On/Off, Volume +/- and Source TV functions. STB
manufacturer will not be responsible for missing some TV model codes, excluding other TV
function keys, end user code teaching performance or ability. This feature has been added to
STB Remote controller as an added value and preventing the necessity of keeping the TV
RCU at near while watching TV with Next brand STB source.
5
To Next Page
Loading...
General