117
Button Description
saved. Position information is normally received
once a second from the GPS. If you do not need
such a detailed log, you can increase this
number to save track log space.
Enable Auto-saving
When auto-saving is enabled, you do not need
to turn track log saving on and off manually.
Nextar Navigation System will automatically
start recording the track log as soon as GPS
position is available.
Track Log Database
Size
This figure shows how much memory is used by
the automatically saved track logs.
Track Logs Max.
Size
You can set the maximum database size for the
automatically saved track logs. When the limit is
reached, the oldest automatically saved track
logs will be deleted.
Create NMEA/SIRF
Log
Independently of the normal track log, you can
instruct Nextar Navigation System to record the
native GPS data received from the GPS device.
These logs are saved as separate text files on
the memory card, and they cannot be shown or
replayed in Nextar Navigation System.
To Next Page
Loading...
Need help?
General
