43
• Tap to open the list of results
before it appears automatically.
4. Select the street from the list.
5. Enter the house number:
1. Tap
.
2. Enter the house number on the keyboard.
3. Tap
to finish entering the address.
6. A list appears with the matching addresses. Tap the desired
one.
7. The map appears with the selected point in the middle. Tap
(Simple mode) or
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.
3.1.2.3 Entering an address without knowing the district/suburb
Long roads can run across several districts or suburbs. You may not
know what particular house number is located where. In this case,
follow the instructions below:
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
(Simple mode), or
, (Advanced mode).
2. By default, Nextar Navigation System proposes the
country/state and city where you are. If needed, tap the button
To Next Page
Loading...
