77
Symbo
l
Name Description
route calculation, the arrow is
put on the nearest road.
Cursor (selected map
location)
The location selected in the Find
menu, or a map point selected by
tapping the map.
Start point The first point of the route.
Normally if GPS position is available,
it is the start point of the route. If
there is no valid GPS position, Nextar
Navigation System uses the last
known GPS position as the start
point.
When you are using a saved route,
Nextar Navigation System asks you if
you want to use your GPS position or
the first point in the saved route as
the start point.
You can also modify the start point in
the Cursor menu. If you do so,
automatic off-route recalculation
needs to be turned off to keep the
selected point as the start point.
If automatic off-route recalculation is
disabled for any of the above, tapping
the
icon in the Turn Preview
field not only initiates route
recalculation from the current GPS
position, but it will re-enable the
automatic off-route recalculation as
well.
To Next Page
Loading...
Need help?
General
