13
System Connections
Inserting SD Card
The unit is designed with an SD Card slot which allows you to
insert an SD card into the unit as shown below:
To remove the card, gently press the card in with your fingernail.
The card unlocks and protrudes slightly. You can now remove
the card. To re-insert the card, press the card in the slot until it
clicks. The card should not protrude from the slot when it is
installed correctly.
Important: If you remove the SD Mapping Data Card to use
the Music or Photo functions, treat the Mapping
Card very carefully to avoid damage or loss of
data.
Allowable SD Card Capacity: 32MB ~ 4GB.
To Next Page
Loading...
Need help?
General
