NextBase 212 - Video Mode (Contd.); Video Length Setting; Information Stamp; G Sensor Sensitivity

VIDEO MODE (CONTD.)
Continued from previous page.
4. Video Length
Select the duration of the individual recorded video files. The iN-CAR CAM will continue
recording, filling the memory card. When the memory card becomes full, the oldest file will be
automatically deleted to make space for the new recording.
Note:
- Protected files will never be deleted.
Options: 2 Minutes, 3 Minutes and 5 Minutes
Default Setting: 3 Minutes
5. Information Stamp
Turn On / Off the Camera Model (NBDVR212) and Time & Date stamps shown on recorded
files.
Options: On and Off
Default Setting: On
Note:
- This also turns OFF the Number Plate stamp, as described later, within the Setup Menu
section of this manual.
6. G Sensor
Turn Off or adjust the sensitivity of the built in G Sensor. The G Sensor detects forces which
will automatically protect the current recording in event of a collision.
Options: High, Middle, Low and Off
Default Setting: Middle
Note:
- Within the Setup Menu which is accessed by pressing the MENU button twice, there is
a ‘Default Setting’ option to allow you to reset the iN-CAR CAM to the factory defaults,
if required.
Video Menu
Resolution
Exposure
Audio Recording
Video Length
Back
MENU
Enter
OK
Video Menu
Audio Recording
Video Length
Information Stamp
G Sensor
19