The iN-CAR CAM can be connected to external video equipment, such as a television or a monitor
within your vehicle that uses standard RCA inputs.
Connect the AV cable (sold separately) between the iN-CAR CAM and your external device, then
turn on the iN-CAR CAM. The screen on the iN-CAR CAM will be blank as the video image is now
being sent to the external device, the red power LED on the iN-CAR CAM will be lit indicating the
unit is turned on.
Menus are not available when the IN-CAR CAM is being used in AV OUT mode.
Make sure that the iN-CAR CAM battery is charged prior to use, as power is not supplied to the
iN-CAR CAM via the AV cable.
For prolonged use an external power supply may be required, use the supplied USB cable with a
5Vdc/USB adaptor, of the type typically supplied with mobile phones.
Note:
- ENSURE that any external power sources are of the correct 5Vdc output, otherwise damage
will be caused that is not covered under the manufacturer’s warranty.
Please visit: nextbaseshop.co.uk to purchase the correct AV Cable (PN: NBDVR212-AVC).
VIDEO & AUDIO OUTPUT
30
To Next Page
Loading...
Need help?
General
