Continued from previous page.
7. Number Plate
Enter the registration number for your vehicle, this will then be shown on the recorded
video files.
Use the OK button to toggle through the fields and use the up & down buttons to set
variables.
Note;
- If the ‘Information Stamp’ has be turned Off from within the Video Menu the
saved Number Plate will no longer be seen.
8. Format SD Card
Format the inserted memory card, this will delete all content.
Note:
- For stable performance, it is recommended that you format the memory card every 2-3
weeks.
Of course, you should only do this AFTER you've downloaded any files from the card
that you may want to keep.
9. System Info
Display the version number of the iN-CAR CAMs software.
10. Default Settings
Reset the iN-CAR CAM to the default settings.
SETUP MENU (CONTD.)
Video Menu
Resolution
Exposure
Audio Recording
Video Length
Back
MENU
Enter
OK
Setup Menu
Number Plate
Format SD Card
System Info
Default Settings
28
To Next Page
Loading...
Need help?
General
