Nexx NXG-100 Installation Guide

Step 5 of 10
Connect to your WiFi network
 Switch to Nexx Garage app. Tap the menu button which is
located on the upper left hand corner. Select "Configure
Device" from the menu. You should see a list of available
WiFi networks.
 Select your home WiFi network or manually enter your
network name.
- Enter your home WiFi network password.
- Tap "Configure" located on the upper right hand corner.
 In less than 30 seconds, your device will reboot. The LED light
will blink several times and then stop, indicating that it has
successfully connected to the WiFi network.
 If your device continues to blink, press the reset button on
the device for 5 seconds until the LED light becomes solid
green. Then repeat step 5.
 If you have further issues, please contact
support@nexxgarage.com or go to
http://www.nexxgarage.com

Nexx NXG-100 Specifications

General

Brand	Nexx
Model	NXG-100
Category	Controller
Language	English