built into the product if the product is damaged in any
way. If the product is damaged, return it to NI for
repair.
Safety Voltages
Connect only voltages that are within the following limits:
Caution Do not connect hazardous voltages to the
NI 9350. A hazardous voltage is a voltage greater than
42.4 V peak voltage or 60 V DC to earth ground.
Maximum voltages
V
sup
-to-COM 30 V DC
DI-to-COM 30 V DC
DO-to-COM 0 V DC to V
sup
NI 9350 Getting Started Guide | © National Instruments | 3
To Next Page
Loading...
